diy pvc filament rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
simple design for making rack out of pvc, only 6 pieces needed versus however many pvc corners youd normally need
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 50
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
in order to make full rack, you need to print 4 of the top/bottom pieces and 2 of the middle pieces. If you want more than just 3 levels, print more middle pieces. I printed with auto tree supports in pla. pvc size is for 1/2 inch pipe. I bought pre cut 2 and a half foot pieces from Lowes and kept that length for the horizontal pieces, for the vertical pieces i cut a 2 and 1/2 piece in half and there is plenty of clearance for the spools to sit. It works without glue but id highly recommend gluing pieces for stability