Raptor, a Nerf Gearcore Pistol
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raptor is a gearcore micro flywheel nerf blaster. Its modular design provides a vertical platform.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 28
- Makes
- 2
- Views
- 304
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
Compact, snappy, modular, and simple. Raptor is a semi-automatic half-dart blaster that utilizes Detroit Dart Works gearcore. Gearcore uses a mechanical pusher and any traditional flycore motor and wheel configuration. Raptor can be configured as either a pistol or smg.
The gearcore files can be found here. https://github.com/DetroitDartworks/Flycore/tree/main/Gearcore%20v1
The rear sight can be found here. https://www.thingiverse.com/thing:4750077
Printing
I recommend printing with 30% gyroid infill and 3 or 4 walls, depending on structural importance. Expect to use 500 to 600g of filament. I use tree supports.
Hardware
Hardware for gearcore included.
Part | Quantity | Source |
M3 X 8mm socket head | 8 short muzzle 9 long muzzle | |
M3 X 12mm socket head | 6 | Amazon kit |
M3 X 16mm socket head | 1 | Amazon kit |
M3 X 20mm socket head | 2 | Amazon kit |
M3 X 25mm socket head | 2 long muzzle | Amazon kit |
M3 hex nut | 2 long muzzle | Amazon kit |
M3 X 4 X 5mm heat-set insert | 15 short muzzle 16 long muzzle | |
Nerf/toy screws | 2 | hobby store I use Out of Darts |
Motor Screws | 4 | hobby store |
OFD Flycore spring | 1 | hobby store |
18mm pen spring (Bick Pilot G-2) | 1 | |
Your choice of 130 motors | 2 | hobby store |
21A micro switch | 1 | hobby store |
XD30 female battery connector | 1 | hobby store |
16 or 18 AWG wire | 45cm red, 25cm black | hobby store |
Your choice of micro flywheels | 2 | hobby store |