Treadmill laptop/tablet holder hooks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hooks to hold a laptop/tablet on a treadmill. Guaranteed to fit a Sole F80 treadmill but should fit other models also.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 29
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hooks to hold a laptop/tablet on a treadmill. Guaranteed to fit a Sole F80 treadmill (as you can see in the photos), but should fit other models also.
The hooks have "teeth" in the back designed to line-up and grab to the back grille for the fans, thus providing extra stability. I initially designed these with "tabs" so that I could use paracord to connect the hooks and help prevent them from moving. Once I printed the hooks though, I found that to be unnecessary in my case since the teeth grabbing the grille on the back makes them very stable already, even with the 16-inch laptop that you see in the photos. For this reason, I've included STL and STEP files with and without the tabs. If printing the hook with tabs, you're going to need two of the hooks (duh!), but remember to mirror one them so that you can have the tabs facing each other.
The exact dimensions of the hooks are shown in one of the figures so that you can check if they'll fit your treadmill. The FreeCAD file is also included in case you want to modify them to your needs.
Printing: I recommend using PETG, with a minimum of 3 perimeters and 20% cubic infill. Maybe increase the inner wall width (say 0.7 mm) so that you get extra strength with a minimal increase in print time ;)