HILOOK Camera Junction Box (dome)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is a custom junction box / mounting base designed for HILOOK dome cameras (tested with IPC-T241H-C).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
HILOOK Camera Junction Box
This model is a custom junction box / mounting base designed for HILOOK dome cameras (tested with IPC-T241H-C).
It allows safe and clean installation by hiding connectors and cables inside the box while keeping the original camera mounting pattern.
The box is designed to fit directly between the camera and the wall or ceiling and provides enough internal space for Ethernet cable, PoE connector, or 12V power cable.
Features
Designed specifically for HILOOK dome cameras
Internal space for cable management and connectors
Uses the original camera mounting screws
Clean and professional look after installation
Suitable for wall or ceiling mounting
Two-part system: base + camera mount ring
Optional cable side entry
Compatible camera
HILOOK IPC-T241H-C
(very likely compatible with similar HILOOK dome models using the same base)
Assembly
Fix the junction box to the wall or ceiling using screws.
Route the Ethernet / power cable inside the box.
Mount the camera using its original screws into the printed adapter.
Close and adjust the camera angle as usual.
Disclaimer
This model is not an official HILOOK accessory.
Use at your own risk and verify dimensions before permanent installation.