1 / 2
Symmetric, Pin Mod and Geared BFI for Voron Trident
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Symmetric, Pin Mod and Geared BFI for Voron Trident
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 14
- Makes
- 0
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
For the gears, I suggest printing with a brim.
There is also a small amount of play in the gears; I couldn’t make it perfect because the gears are small.
The housing for the trident was incorrect in Symetrical Mod, I replaced it with the correct version.
The 14-tooth gear fits tightly onto the screw; apply glue to secure it.
BOM
M5x40 SHCS x4
M5 hex nuts x4
5mm diameter pin, 18mm long x2
M2x10 Self Tapping Screw from Official VT BOM x6
>>>Shotout to clee, Jadecky, Diyshift and Tetsu from github.
