1 / 2
Dell Wyse 5070 Minimal Stand Improved
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Improved version of the Dell Wyse 5070 Minimal Stand
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 56
- Makes
- 1
- Views
- 229
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The original minimal stand with posts properly attached to the body and additional chamfer for added strength.
Used print settings:
Filament: Jayo PLA+ Blue
Layer height: 0.28 (0.4 nozzle)
Wall loops: 3
Infill: 15%
Enable support: Yes (important)
Minimum sparse infill threshold: 50 mm2 (important)