STM32 disco Organizer and case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case and organizer for STM32 disco l475vg iot.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
17/04/2026: Added taller top cover so it can be closed while wires are connected
Magnets needed are 6x3mm and are friction fit into the organizer.
The screws for the top cover are M3, length does not matter.
The screws for the LCD holder are also M3 and cannot be any longer than 7,5mm.
Assembly requires to friction fit the magnets into the organizer(Main - bottom), then screwing in the M3 screws to the top cover(Main - Top). The screws can be raised or lowered to adjust clamping force.
Organizer made to fit:
STM32 Microcontroller Case by Martin_Url
https://www.printables.com/model/671138-stm32-microcontroller-case-b-l4s5i-iot01aAdaftruit half sized breadboard
https://www.adafruit.com/product/64DFRobot LCD display DFR0554
https://no.mouser.com/ProductDetail/DFRobot/DFR0554?qs=%252BEew9%252B0nqrBfiTD8IB3vYA%3D%3D&srsltid=AfmBOooGT4zfGo72Q73bJDOciS44jM4xG5v_3hiCZ6RGnBW1E-z_9WSY