1 / 7
Housing for hygrometer.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had a Chinese hygrometer, so I made a case for it so it wouldn't end up lying around in the corner. I could put it on
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Printing without support. If the slicer complains about missing support, you can ignore it. The latch inside the housing has a gap of 0.2 mm.
I used neodymium cylindrical magnets with a diameter of 5 mm and a height of 4 mm. The magnets fit snugly, no glue required.
Provided the print and your printer are properly configured.
Insert the hygrometer into the slots and twist until it locks into place.