Ram Ball mount for Yaesu Radio's
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Ram Ball mount for Yaesu Radio's. Originally designed for the FTM-500D.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is a Ram Ball mount for Yaesu Radio's. I Originally designed this for my FTM-500D. Yaesu uses an M5 x .8 screw to mount their remote heads on multiple models. I do know this fits the FTM-500D and FTM-510DR/DRASP. I had access to both radios to test the fit. I have provided three models based on the screw that you can find. The shortest length is 30mm, then 35mm and 40mm. For the screw I used a Hexagon socket pan head screw. I sized the counterbore so you can fit a flat washer. For printing I used PETG with a 15% Gyroid infill and three walls. Print with the base down and allow supports from the print bed. There is a small 1.5mm counterbore since the rivnut on the radio is slightly raised. This has lasted a Georgia summer and winter in my truck and has not deformed.