1 / 7
Holder for pen, laser module and vinyl cutter for quick toolchange (FreeCad files included) — image 1
1 / 7

Holder for pen, laser module and vinyl cutter for quick toolchange (FreeCad files included)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Penholder, vinyl cutter and laser module can be changed in seconds with the BL-Touch leveling sensor.

Rating
0 / 5
Likes
4
Downloads
22
Makes
0
Views
135
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

This is a collection of holders to be able to quickly switch functions. The quick-change holder, which these tools are designed for, is for an Creality Ender 3, but the base may be designed for other printers, too. The neat part is, that you can also easily swap the BL-Touch leveling sensor without screws or plugging it in and out.

These models are based on other works. Here are the sources and modifications:

Pen Holder

https://www.printables.com/model/311639-ender5-pen-holder-for-xy-plotter by "Werner xxx"

  • Great design. Very sturdy in all axes except the vertical one, which is desired to write with a bit of pressure.

  • SCAD file available at the linked model page!

  • Modification: made it a bit thicker, allows wider pens, changed screw size from M4 to M3, added alignment pins for indexing the BLTouch mount.

Vinyl Cutter

Based on the idea of: https://www.printables.com/model/741765-spring-loaded-vinyl-cutter-holder-with-hotswap-mou by "IridiumIO"

  • Also great design to allow movement only in the vertical direction while maintaining pressure to cut the vinyl but not the plastic backing material.

  • Modification: complete redesign because my cutter came with different dimensions (14mm main diameter). Removed the need for screws by integrating everything on a fixed back plane. Enlarged the threaded hole in the top so that you can insert the cutter from the top (but you can also load it from the front if you push down the little pin of the cutter).

  • The original model suggested a tight fit for the holder and then sanding the holde to allow the cutter to slide up and down. I found the sanding quite difficult, therefore you might want to increase the hole before printing (negative volume in the slider or adjusting in freecad)

Laser Module

Designed for a Creality Laser Module for the Ender 3 S1. The laser comes with a metal plate to slide the laser on. This is a simple piece that has includes such a plate on one side and the quick change plate on the other side. It also has indexing features to position the BL-Touch sensor that it is at the perfect height to level the laser. 

Quick tool change system

https://www.thingiverse.com/thing:3369444 by "ProperPrinting" (Jón Schone)

The holder for the quick change tools. Please download the model there. I added a small hole at the top to anchor a PTFE tube as a cable guide.

Printing:

Please refer to the slicer screenshots. Most parts can be printed without supports. For the Laser Module I used the PrusaSlicer cutting feature to be able to print it without supports. I cut the "all-in-one" file at two heights (18 and 9mm after laying it on the largest side) and added conical connectors for indexing (see screenshot)

I used "Tough PLA" from material4print with usually 2 walls and 15% infill. The vinyl cutter was printed with 3 walls as it drags over the surface and should not bend.

Assembly

I used CA glue (Sekundenkleber) to glue the individual pieces together. Every part has indexing features, in oder to align the parts easily for gluing.

The BL-Touch mount has beveled borders and a rail to slide along. The first time it may be hard to get on and off again (a flat screwdriver might help), but after that, the connection is very stiff and stable but pulls apart easily when pulling directly forward.

Tags