Display mounting bracket for Yaesu FTM-400
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bracket permits mounting the display head of the FTM400 to the underside of a shelf.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Yaesu FTM400 VHF/UHF amateur radio transceiver has a separate control head that can be mounted away from the main body of the transceiver. It comes with a sheet metal stand that can be attached to a top surface, but the back of the control head has a protrusion for a GPS antenna that prevents it from being used to suspend it from above.
To overcome this I decided to make a bracket that would attach to the underside of the mount point and attach to the back of the control head using an M5x8 screw. The screw hole is recessed so the thickness of the bracket at the screw hole is 2 mm. The top plate of the bracket has a couple of countersunk 3mm screw holes for mounting.
This was printed using PLA without support (upside down) without problems on an Ender-3 ProB using 50% infill for strength, using the stock 0.4mm nozzle and standard quality.
I don't require payment for my designs, but if you find this useful, I'd appreciate it if you would buy me a coffee.
My Venmo ID is @Techineer. Thanks!