Table Leg Mounted Headset Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A headset stand designed to clip on a 1.25" (31.75mm) table leg. Designed mainly for the Sennheiser HD560s.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
A headset stand I designed to clip onto my table leg (1.25"). Designed to hold my headset (Sennheiser HD560S) but might hold other similar headsets with similar width and notch in headband. Part files are provided so you can make your own adjustments.
I printed it out of PLA and it does the job, requires a decent amount of flex to fit it on so wouldnt recommend repeatedly taking it off and on. Will require a small amount of support for the dovetail section. This is my first design for 3d printing so has been treated essentially as a "learning experience".