Parametric Letter/Number Punch Guide and Storage Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric Letter/Number Punch Guide and Storage Box.The Letter Punch guide is inspired by Blondihacks. I do not think…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Parametric Letter/Number Punch Guide and Storage Box.
The Letter Punch guide is inspired by Blondihacks. I do not think it is required to make this guide out of metal; a 3D print should work just fine.
The letter size of the punches is 3mm.
Non-affiliated link for the punches: https://nl.aliexpress.com/item/1005007466796643.html?spm=a2g0o.order_list.order_list_main.28.67af79d24q2WPd&gatewayAdapt=glo2nld
3D printed parts:
BottomBox_3mm.stl (1x)
LidBox_3mm.stl (1x)
HingeGlueInLeft.stl (1x)
HingeGlueInRight.stl (1x)
Base_3mm.stl and/or BaseWithFeet_3mm.stl (1x)
Carriage_3mm.stl (1x)
Other parts:
magnets for box: diameter 10mm, thickness 2mm (4x)
magnets for guide base (optional): diameter 5mm, thickness 2.5mm (4x)
Recommended material:
PETG 10% infill for BottomBox_3mm and LidBox_3mm
PETG 95% infill for HingeGlueInLeft.stl and HingeGlueInRight.stl
Remarks:
it is of course possible to print BottomBoxEx_3mm.stl without using the glued-in hinges. However, the hinge will become a weak point then due to the layer orientation during printing.
the letter size of the punches 5mm have been added
Category: Tool Holders & Boxes