Planetary Bean Bouncer – DIY Flour Sifter Coffee Roaster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the Planetary Bean Bouncer, an open-source DIY coffee roaster based around a stainless-steel flour sifter…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 9
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This is the Planetary Bean Bouncer, an open-source DIY coffee roaster based around a stainless-steel flour sifter drum, driven by a single motor using a wobble disc and planetary gear system.
The wobble disc converts motor rotation into a gentle orbital motion, helping tumble and mix beans evenly inside the drum for more consistent roasting.
This listing includes STL files only for the mechanical printed parts. Full documentation, electronics, firmware, BOM, and build notes are hosted externally.
What’s Included Here
STL files for the current mechanical design
Updated parts focused on cleaner wiring and enclosure routing
Designed for hobbyist fabrication (3D printing + basic hardware)
Optional fit and tolerance test prints to verify printer accuracy before printing the main parts.
What’s Not Included Here
Electronics schematics or firmware
Bill of Materials (BOM)
Assembly instructions or calibration steps
For the full project (required to build):
GitHub repository: https://github.com/geodave810/planetary-bean-bouncer
Build log site: https://forum.v1e.com/t/diy-coffee-roaster/51195
YouTube Playlist: https://www.youtube.com/watch?v=dA9DvBSW2dg&list=PLyy5iFdDEfauqgzqg_eptvup8FIkFzkNk&pp=gAQBsAgC
Project Overview
Single-motor drive system
Planetary agitator for even bean movement
Flour sifter drum roasting chamber
Modular, experimental design intended for iteration and customization
This project is actively developed and evolving. The STLs may change as the design is refined. Any changes will show up in the GitHub repository first.
Safety Note: This is an experimental DIY project involving heat, moving parts, and electrical components. It is intended for experienced makers. Please review the full build guide and documentation before attempting to build or operate this design.
Licensing
Hardware (STLs): CC BY-NC 4.0
Firmware & code (on GitHub): MIT License
Category: Kitchen & Dining