1 / 8
Dual Hard Drive Caddy (3.5")
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dual Hard Drive Caddy for 3.5" Hard Drives
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Needed a hard drive caddy for a NAS I was building. Couldn't find anything that fit the way I needed.
Modelled in Inventor and Fusion 360.
Needs:
4x M4x8mm screws (no need for nuts, tolerances are set to create threads)
2x Dabs of glue for the crossbar
If printing separate parts, you will need to make sure to print 2 of the rear bars and you're good to go!
Give it a whirl and let me know what you think!
Printed on a Kobra 2 Pro
PETG @ .20mm LH