Heltec V4 case with GPS, 18650 and switch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimalistic case for Heltec LoRa32 V4 with GPS, single 18650 battery and power switch. No screws required!
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 368
- Makes
- 2
- Views
- 2,255
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
Case for Heltec LoRa32 V4 - https://www.aliexpress.com/item/1005010609328381.html
GPS module
simple antenna
18650 battery (soldered leads)
mini slide switch https://www.aliexpress.com/item/1005005508763350.html
Inspired by https://www.printables.com/model/1533100-heltec-v4-18650-compact-case/comments
Instructions:
Print with no supports, placed with long faces on the plate. (Tested with PLA and PETG)
Insert buttons from the inside into the front part. The shorter one is for reset.
Connect power connector
Bend the GPS and antenna cables - note that the LoRa antenna is on the opposite side from the WiFi antenna on the display
(ignore the stripped LoRa antenna connector... it works with the connector too).
Slide the components into the front part.
Slide in the 18650 battery and insert the switch (with wires soldered to the power cable from the kit) into the back part.
Slide the parts together and secure with a key ring.
