Dell Optiplex/Pro Micro wall/HSW mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach it to a wall or a HSW (Honeycomb Storage Wall) lattice using M4 countersunk screws.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 118
- Makes
- 0
- Views
- 447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
considerations before printing
Both PC and power supply slots are symmetrical on 2 axes: the devices can be inserted from either end, and facing towards or away from the wall/HSW lattice.
In order to choose, examine how you want to position your devices. Take note of side of the power supply socket on the PC once the model is installed.
The models can be mirrored to get the power supply on the side of your choice.
how to print
The models can be mirrored to insert the power supply on the side of your choice.
3 models provided. The screw gaps have been calculated to match HSW's lattice.
• top insertion: device inserted from the top (recommended for a vertical wall mount)
• side insertion: device inserted from a side
• universal: holes for both options are included, so you can choose after printing
Print with the bottom on the build plate, as provided. No supports required.
Electronic devices can get quite warm. Do not print in PLA. PETG is advised.
how to use
Countersunk screws, M4 (base < ⌀4, top < ⌀8).
Attach it to the wall/HSW folling below instructions.
Then simply push the device in.
The devices can be inserted from either end, and facing towards or away from the wall/HSW lattice.
wall mounting
Vertical mounting: use screws in the top holes. Screws in the bottom holes are optional.
Horizontal mounting: use screws in both holes.
HSW mounting
Follow instructions on the dedicated page.
links to components
(these are affiliate links, using them will cost you nothing, but will support my work)
(you can try and browse for other cheaper sellers, those are the ones i ordered from)
selftapping countersunk screws (M4 variants)
countersunk bolt screws (M4 variants)
changelog
2026-05: new version for compatibility with HSW.
2026-06: added a variant fitting the Dell 180W AC adapter.