1 / 2
Klicky Bracket for Eva 2.4 Mercury One.1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount for the Klicky sensor was designed for the Eva 2.4 gantry of the Mercury One.1
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Open Community License v1
Check the magnets to see if they are aligned with the design. If they are not aligned correctly, just mirror the file.
https://github.com/tanaes/whopping_Voron_mods/tree/main/pcb_klicky
A .step file is included should you wish to make any adjustments.
Recommendation:
Printing using a 0.4mm nozzle.
Extrusion width at 0.4mm.
The first layer height should be 0.24mm.
Layer height 0.2mm.
Print in PETG or TRITAN, PLA is brittle and can't handle the pressure.