1 / 1
Gemmy Wobbler Series "Wobbling" Piece
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An offset wheel used for making the "Wobbler" Series "Wobble" back and forth.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This model is for the Gemmy Wobbler Series "Wobbling" Piece, it is an offset wheel located on the bottom of the product and attached to the gearbox using a press fit
The shaft this mates to is .100 thou and must be tight with no side to side wiggle. You should print so that it is difficult to get on, but not impossible.
Print Settings:
100% Infill
PETG (Recommended)
-0.1 Expansion
This model is free to use however you may not sell/trade/barter with it.