Growing lamp clamp holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A baseplate to hold your growing lights.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 6
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Some growing lights are designed to grip on the side of the plant pot, but for smaller plants this is sometimes not an option, because they are too light. This is where this model comes in. It has a block to grip to and a large base to put the plant pot on. Because of the weight and physics, the lamp now doesn't tip over. hooray!
Printing Tip:
Use a higher infill percentage where there is the small section between the base and the block, otherwise it will bend a bit sideways if the lamp isn't perfectly centered. At least in PLA.
Material | PLA or other |
Infill | 5-10% |
Infill on "bridge" | 30% |