1 / 7
Statue of Meridia from The Elder Scrolls: Skyrim - With place for Meridia's Beacon — image 1
1 / 7

Statue of Meridia from The Elder Scrolls: Skyrim - With place for Meridia's Beacon

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Statue of Meridia combined with a base for displaying Meridia's Beacon

Rating
5 / 5
Likes
33
Downloads
114
Makes
1
Views
738
Reviews
1

Updated at source:

Model information

Category
Sculptures
License
Creative Commons — Attribution — Share Alike

"A new hand touches the beacon. Listen. Hear me and obey. A foul darkness has seeped into my temple. A darkness that you will destroy. Return my beacon to Mount Kilkreath. And I will make you the instrument of my cleansing light."

I wanted to print a statue of Meridia in order to grow my TES statue collection, but I couldn't find any that I really liked. 

artash44 had posted a model that I assume is extracted from Skyrim. It looks identical to the statue at her shrine in the game. It is somewhat low resolution, though it was the best I could find and looks good enough when printed if you are not looking too closely.

But the model does not have a base, probably because it was placed directly onto other structures in the game. At the same time I thought it would be cool if I could incorporate the Beacon of Meridia into the display, so I decided to combine the statue with a base large enough to accomplish that.

I found this great round stone brick base posted by outcastrc, modified it slightly to make the bottom smooth and flat, and then combined both it and the statue into a single file.

The beacon is printed from this: https://www.thingiverse.com/thing:6468240 . I printed mine at 200%, but I might print another slightly larger(maybe 250%). I cannot really tell how large it is supposed to be in the game, but I always assumed it to fit in the palm of your hand.

Printing

13.5h print on Core One with Balanced settings:

Layer height: 0.12

Top layers: 7

Avoid crossing perimeters: ON.

Infill density: 8%

Infill pattern: Adaptive cubic.

Brim: ON.

Support: Organic

Overhang threshold 35%

Support on build plate only.

I manually blocked support on the clothing fold above the thigh, and painted on seams on the back of the head and rear corners of the "wings"(See images).

I cannot guarantee how well the fingers print with FDM if you scale the statue down a lot. They are very thin and fragile even at the default size.

I printed mine in Prusament Galaxy Black. It looks a lot more like black/charcoal grey stone in RL than it does in the images.

Tags