Nikon Rangefinder Camera Grip for S2 S3 S4 SP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nikon Rangefinder grip
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
IMPORTANT: I am not responsible for your print breaking and your camera falling. Do NOT print this with PLA. Always use a wrist or neck strap. This must be printed on its side for proper layer strength, do not print it from bottom to top. A 3/8" tripod plate screw is required (like this one).
This is a hand grip for Nikon Rangefinder cameras, inspired by the Nikon F36 cordless battery pack. It has a built-in Arca Swiss plate and adds stabillity to the camera when used with larger lenses. Unfortunately, it must be removed in order to load and unload film. This is due to the tripod mount in Nikon rangefinders and F SLR extending through to the body.
Recommended to print with an engineering material like PAHT-CF or PA6-GF, at least 3-4 walls, and 35% gyroid infill