Solder Iron Holder/stand for YIHUA 928D-IV Soldering Iron Pen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stores and protects iron tip when not in use. Includes tray for solder sponge.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
On the recommendation of a colleague, I purchased the YIHUA 928D-IV Soldering Iron Pen
https://www.amazon.com/dp/B0DK995CB5 and I love it. The extremely fine tip is good for soldering the very small SMD components and integrated circuits. I also love how it heats from room temperature to nearly 600 degrees in about 5 seconds, so it is practical to turn it off and on between solder joints.
While it came with a nice carry case (which I don't use on my workbench), it needs a holder. My requirements for an iron holder are that it safely and securely stores the iron when not being used, and prevents anything from falling on the hot tip.
With that in mind, I created the file provided here. It uses the cap that came with the iron to hold it and protect the tip from coming into contact with anything. The cap slips down inside the rings and can be easily removed to use the iron tip cleaner located in the end of the cap. The cap also protects the frame from heat from the tip & barrel. (While it will work without the cap, I don't recommend it!) The handle rests against an extension that holds it safely in place without being bulky or inconvenient. The tray can be used to hold a sponge for cleaning the tip.
Supports are recommended for the rings, but the rest of the stand should print without them. PLA or PETG should work fine.
If you print it, post your make!
I don't charge for my designs, but if you find it useful, a cup of coffee would be appreciated!
My Venmo ID is @Techineer.