1 / 3
Lashing Strap Reeler / Winder V2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The reeler enables lashing straps (max 6m length) to be rolled up quickly and stored cleanly. Version 2
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 203
- Makes
- 0
- Views
- 1,185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
No more messing up the lashing straps and fast, clean rolling up. Designed to handle straps up to 25 mm width and 6m length.
Improved Version V2:
- the reel and drum has now a snap function, gives more stability during winding
- the slot in the Drum is tighter, to avoid twisting of the belt
Printing/Assembling:
- Print the 4 parts (PETG 0,3mm layer height, 20% infill)
- Put the shaft through the hole in the reel
- click in the crank on the other side of the reel (needs a bit of force)
How to use:
- put the end of the belt into the slot of the reel shaft
- wind it 2-3 times up
- place the drum over the reel, place the belt in the drum slot
- Hold the drum and turn the reel with the crank