1 / 1
VFC MP7 GBBR Hop Arm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hop arm with tighter tolerances and bigger pressure point.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 39
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
Original arm has lots of slop in the pin hole allowing for front to back movement of the arm. It also has slop in the width allowing for side to side movement. The pressure point of the arm also doesn't fill the window available for applying pressure, this arm has a larger contact radius than stock.
My print settings:
0.4 nozzle
0.2 layer height
100% infill
2 walls
precise z height setting in bambu slicer
auto hole compensate bambu slicer
0.2 elephant foot
brim since its a small part, clean up with razor blade or sandpaper after print