1 / 7
AlfaRC Cub-AIO 2in FPV VTX Antenna Mount (TPU)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU VTX antenna mount for the AlfaRC Cub-AIO 2in. Slots over the rear standoff; 1, 1.6 and 2.5 mm wire sizes.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
What it is
A VTX antenna mount for the AlfaRC Cub-AIO 2in FPV frame. It slots over the rear standoff and works with multiple types of antennas.
Versions
There are three versions with 1 mm, 1.6 mm and 2.5 mm holes. Pick the one that matches the diameter of your antenna wire.
Print settings
95A TPU
0.2 mm layer height
2 walls/perimeters
10% infill
Very little supports needed
Printed on an Ender 3
Related Cub-AIO models
Feel free to leave any questions or suggestions in the comments. Thank you!