1 / 3
VW California T6.1 heater deflector for the seat exhaust — image 1
1 / 3

VW California T6.1 heater deflector for the seat exhaust

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A small deflector which can be installed on the exhaust next to the seat / safety belt

Rating
0 / 5
Likes
7
Downloads
35
Makes
0
Views
459
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

A small deflector which can be installed on the exhaust next to the seat / safety belt and redirects the heat away from the intake next to the door - the Webasto will not switch off too early then and the heating is more constant.

Inspired by "Calidea Vent" here:

https://www.thingiverse.com/thing:4780908

This model can be printed without any support and it is modular, so maybe instead of the pipe on top, I will also design a hose adaptor so let's see.

There are two version of the base adapter - one with no tolerance and one with 0.25mm tolerance for the pipe to slide in - if your printer is very accurate (like a Bambulab X1C for example), use the one without tolerance otherwise the pipe will be too lose and won't hold properly. In case it is to tight, use the model file with the built in tolerance.

Added another pipe outlet which uses a drop shape on top, so can be printed easier without support.

Tags