EZ Press, the 1/32 slot car pinion press assistant
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
to help those with the manual dexterity of an old man
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 44
- Makes
- 0
- Views
- 297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to the originator of this idea, Heckschleuder, on freeslotter.de, I'm sharing this simple print to help those of us with only two hands to make installing a pinion on a 1/32 slot car motor a bit easier.
I'm taking submissions/requests to model these for other pinion pressing tools. Please message me or email me ([email protected]) with the name of your tool, the width of the opening for the motor (in mm), and the thickness of the tool at the opening (in mm), and I will upload versions for that tool ASAP. Exact measurements with a digital caliper is ideal. I will add appropriate tolerance in my model.
No special materials or print settings needed, but I designed it and tested it in PLA. Be sure to account for shrinkage with other materials.
If you know Fusion360, I've shared an f3d file you can use to adapt to your tool. Just change the parameters for the tool and everything will automatically update. Please share your versions as a remix to this, so other people can easily find them.