Valve Index Lowpoly Visor with vent for fan users
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you use a fan in the Valve Index's front compartment, this allows for airflow while the visor is attached.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 10
- Makes
- 1
- Views
- 148
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you use a fan in the Valve Index's front compartment, this modification of the visor by @LyzGameArt allows for airflow while it is attached.
The slots don't need supports if you print the visor vertically from the top edge. The pins on the back do need supports.
Note: if you don't want to buy magnets for the pins, you can either make them slightly larger before printing, wrap a layer of masking tape around them, or press a pen tip into them to gently enlarge the diameter slightly. These methods will allow the visor to stay in place with friction.