Dry Erase Pen Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pen holder you can attach to a Quartet glass dry erase board. No hardware required, it's friction fit. The glass on…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 36
- Makes
- 0
- Views
- 332
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
A pen holder you can attach to a Quartet glass dry erase board. No hardware required, it's friction fit.
The glass on my board is 3.65mm thick, if your's is about the same thickness, you can print the STL. Otherwise you can modify the 3d model. The model is parametric, you can change the values in user parameters.
Print flat with support inside the groove. No support needed for the holders as the angle should print ok with most printers.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: PolyMaker PETG
Category: Office