Sewing needles magnetic holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A magnetized holder for sewing needles and pins. There are holes for 9 magnets (12mm diameter, 2mm thick). The magnets…
- Rating
- 5 / 5
- Likes
- 90
- Downloads
- 158
- Makes
- 1
- Views
- 1,095
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
A magnetized holder for sewing needles and pins.
There are holes for 9 magnets (12mm diameter, 2mm thick). The magnets must be glued (I used hot glue). The base could be filled with concrete to make it heavier. The height of concrete should not exceed 5mm.
To prevent slipping, you can print the rubber feet twice (with flexible filament) and glue them at the bottom.
Fusion 360 files are provided for eventual remixing.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20
Filament: BotFeeder and Overture PLA (Top) PETG (Bottom) Turquoise and white
Category: Household Supplies