Linked Dipole Connector Bracket for Wago 221-2401 Lever Nuts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a stout bracket to house the Waygo 221-2401 Lever Nut for constructing a linked dipole for QRP operation.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 1
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This was designed to hold the Waygo 221-2401 Lever Nut. It has a tab under the bridge across the connector to help secure it in place. It has enough clearance that the levers can be raised, but in the closed position, they should fall in plane with the bracket to avoid inadvertent disconnection. This was designed to be printed with PETG for good weather and heat resistance.
I will be producing variations on this design to skip dogbone connections and do direct wire stress relief / connection, and some additional mini dog bones to manage excess wire length neatly.