Wall Mounting plate for RaspberryPi
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.24 – €2.74 net (excluding VAT)
For file: RPiWallMount_0.3mm_PETG_MK3S_2h23m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.49 excluding VAT (range midpoint).
- Weight reported by the author
- 36 g
- Print time reported by the author
- 2.38 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An open mounting plate to mount and protect your Raspberry Pi on a wall while keeping it cool and breathy.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 28
- Makes
- 1
- Views
- 180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Share Alike
This is a wall mounting plate for Raspberry Pis. I needed a version that would allow passive cooling, protect from dust and look cool.
This model can be easily printed in PETG or PLA with 0.3mm layers. There is enough room to take the Micro SD card out. Most connectors are oriented downward to allow safe disconnect if a user steps or pull a USB cable.