1 / 4
Airbrush stand Mods - screws and magnetic base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mods for magnetic base and screw assembly.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified to assemble airbrush cradles to base with 3 M3x8 flat head screws. Added recesses to press-fit up to 3 3x12mm magnets for a magnetic base instead of table edge clamp.
Original airbrush cradle mounting hole modified to accommodate the M3 screw.
Including a modified cradle to hold a vintage Thayer & Chandler Vega with a siphon feed bottom cup. It's not as polished as the original design but is a functional print.