Flex ATX Bracket for NAS CASE 6-bay (+3 SSD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Securely mount a Flex ATX PSU in the space allocated for a SFX power supply.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The wonderful NAS CASE 6-bay (+3 SSD) project from https://www.printables.com/@makerunit_735717 expects a SFX form factor PSU. This bracket allows you to use a Flex ATX form factor instead.
I modified "external_upper_right_panel_v13.stl" to add a 4.5mm hole for a threaded insert on the bottom of the bracket intended for the SFX power supply, but you can achieve the same thing with a drill. Placement isn't critical, but the further back you place it the better. Be careful not to block any vents on the PSU.
Couple this with the below adapter plate and you'll be good to go!