1 / 6
1610/T8 CNC Z and X axis Bearing Blocks — image 1
1 / 6

1610/T8 CNC Z and X axis Bearing Blocks

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I was hunting around for things to make my 1610 a little more sturdy (mostly as a way to avoid spending money on a…

Rating
0 / 5
Likes
2
Downloads
12
Makes
0
Views
294
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

I was hunting around for things to make my 1610 a little more sturdy (mostly as a way to avoid spending money on a 3018) and came across TRAXA's bearing block. It wasn't set up for the bearings I had on hand so I had a go at recreating it in Fusion.

One thing led to another and as I already had the axis modelled up I thought I'd also create a stiffener/bearing block for the X-axis as my machine was a version that just had thin metal plates bolted together with flimsy angle brackets..

The end result of all this is both X and Z have been made a lot sturdier and has given the machine a new lease of life.

Things you will need:

6x LM8UU bearings (8x15x24mm) - 4 for X, 2 for Z

12x M4 brass inserts to press into the blocks

2x 24mm spacers for the front of the Z axis - I ended up making some out of brass on the minilathe.

I printed the Z block at 100% infill, and the X block at 60% with 5 perimeters for strength and pressing in the inserts with a soldering iron.

I also drilled holes at the back of the Z plates to line up with those in the bearing block to make sure it was securely attached at both sides.

Category: Machine Tools

Tags