CAGE SONY A7 IV WHIT ACCESSORIES

For printing, I used ASA and PETG-CF with 30% "Honeycomb" infill and a 0.2mm layer height; both materials showed similar strength.

If your printer is well-calibrated, you don't need to enable supports for the insert holes, as any slight deformation won't affect the installation of the heat-set inserts with a soldering iron.

The necessary screws and metal inserts are specified in the photos and can be adapted to the user's taste or needs. The build is quite sturdy as long as the lens used isn't excessively heavy. All camera covers and tabs remain accessible.

OPTIONAL NOTE: A 1/4" insert can also be added to the handles to attach accessories and reduce the overall weight of the cage.