1 / 3
Sink Plunger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple and small, light-duty plunger meant for a kitchen sink.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple, light-duty plunger for a kitchen sink with a ~80mm drain. This provides a small, light amount of pressure on the drain, enough to clear a small blockage.
Filament: TPU / Flexible (I printed using a 90a TPU)
Layer height: 0.2mm rec.
Perimeters: 3 perimeters for a 0.4mm nozzle, 2 is fine for a 0.6mm nozzle.
Infill doesn't matter as the walls are only 1mm thick and completed with only perimeters anyway.