1 / 3
Chicago Steno Low Profile Keycaps (Kailh Choc) — image 1
1 / 3

Chicago Steno Low Profile Keycaps (Kailh Choc)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Low profile ergonomic keycap (Choc stems). Perfect for compact keyboards like Ferris, Corne, Kyria, Lily58, etc.

Rating
5 / 5
Likes
172
Downloads
1,020
Makes
5
Views
12,398
Reviews
6

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

High-resolution STLs for a variation of Chicago Stenographer low-pro keycaps (Choc stems). Perfect for compact keyboards like Ferris, Corne, Kyria, Lily58, etc.

Generated using modified code from https://github.com/pseudoku/PseudoMakeMeKeyCapProfiles

Recommended R2-R3-R2 for each column. For inner index column (the one that index finger has to move to the side for) Convex + Convex Tall can be a good option. For thumbs, either the Thumb or Convex keys work well.

For FDM, best printed at a shallow angle (30-45deg) to preserve z-axis resolution along the the top surface. Stems stacked vertically (so that layer lines follow the finger direction of travel for a smooth top surface feel).

  • .07-.15 layer height
  • 0 infill
  • 0 top/bottom layers
  • 2-3 perimeters/walls
  • Slow down outer perimeters (10-20mm/s). Make sure the entire perimeter is printed at the same speed (Slicers will often slow down a layer if total layer time is below a threshold. Look at the layer speed visualization to confirm everything is uniform.)
  • Seam on the back/bottom
  • Supports for stems and the edges (but not the middle to make supports easier to remove)
  • No raft/brim
  • Avoid crossing perimeters
  • Disable Z-hop
  • (For PLA) Reduce temp -5-10deg from normal. Rotate your model so that the top surface faces the print fan for better cooling.
  • (For Cura) Enable coasting + wall flow compensation + tree supports
     

Tags