print-in-place hinge design
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
simple print-in-place hinge to add to other designs It's so simple to print even I could do it, please post makes! :)
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 279
- Makes
- 2
- Views
- 1,405
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
simple print-in-place hinge to add to other designs
It's so simple to print even I could do it, please post makes! :)
Print Settings
Printer:
Sovol SV01
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
Gyroid 15% (full size), 20% (half size H), 100% (half size V)
Filament:
Sovol PLA
White
Notes:
Tested both at full (20 mm wide) and half size.
Both vertical and horizontal print tests successful.Sliced with Cura. For the vertical half size I chose an initial layer horizontal expansion of -0.1 mm because my printer over-extrudes slightly causing elephant foot. Chose Gyroid in-fill for better strength.
Original Tinkercad objects:
Category: 3D Printing