1 / 1
Reciprocating Saw Blade Holder for 3" Slatwall — image 1

Reciprocating Saw Blade Holder for 3" Slatwall

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Reciprocating saw blade holder for standard 3" Slatwall such as storeWall.

Rating
0 / 5
Likes
2
Downloads
14
Makes
0
Views
75
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Uses the same base clip as my other Slatwall models.  For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed.

I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not marr PVC Slatwall, but you should file the little latching nub down as needed to avoid any damage.  Don't force it onto your wall if you feel too much resistance.

The Part2 parts that latch onto the Slatwall must be printed on their sides for strength.  If you have good build surface adhesion you can get away without a brim, but the little thin part that latches up into the slatwall has a tendency to warp and pull away from the build surface.

The blade opening dimensions on this as a bit touchy....I've found that printing with different # of perimeters or printing with different extrusion multipliers or with external perimeters first can make a noticeable difference for fitment.