Fixed Hextraction Secret Lid and Flipper Body
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hextraction secret bodies don't fit the lids. This fixes the problem :)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed the Hextraction secret bodies, then printed a single lid to check if it fit.
It did not. The pegs are 5mm and the holes are 3mm in most of the secret tile STL's.
So I modified the lid pegs to fit all of them. Then I raised the top surface and chamfered the questionmark to make it easier to fit the inlay. Also added the flipper dingus STL here so nobody has to open the step file to get that printed.
I actually really like the way the tile looks when printed with supports, both before and after support removal :)
Just in case you printed the lids first and need fixed tile bodies instead, @JohnLattanzio_387784made those over at https://www.printables.com/model/496288-fixed-secret-hextraction-mystery-tiles/files