Vector Optics Omega 8 lens protector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lens protector for Vector Optics Omega 8 red dot
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Remix of https://www.thingiverse.com/thing:6612556 made by MrDeath_X1
"Arms" removed compared to original design
Redesigned to be printed in TPU in mind.
The little "slot" at the top should be able to slide into the Omega red dot and hopefully the cover will not move. (And some black tape could be added if needed, still keeping the "no arm" design).
Re uploaded the original template for cutting the polycarbonate just in case. (Made no change compated to the original)
Printed in TPU (hopefully this will absorb bbs impact)
Printed "flat" on the printer bed
No support (was just OK even for the groove with my printer) (You may add support if required for you)
8 bottom layers (hopefully this will absorb bbs impact)
4 top layers
4 walls
20% infill (Cubic Sub.)
12 g / 4.13m TPU
~ 1h30 print