Dell Wyse 5070 M.2 M2 ethernet mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I bought an M.2 ethernet adapter for one of my Dell Wyse 5070 machines.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
I bought an M.2 ethernet adapter for one of my Dell Wyse 5070 machines. It was a slightly different form factor than other M.2 ethernet modules I used in the past.
I designed this part to use four M3 6mm flat head screws and two M3 heat set inserts. Longer screws will work, within reason.
You could probably skip the heat inserts and use a very long M3 screw (45mm+) and a nut. I didn't try that.
Use the auto-orient feature in your slicer. You should probably use PETG or ABS. PLA might not handle the heat of a running computer.
STEP files are included in case anyone wants to use this as a base for another project.