Mini-ITX Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fully 3D printed stand for Mini ITX motherboards.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
A fully 3D printed stand for Mini-ITX motherboards that don't need an SFX or ATX PSU (e.g. ASRock N100DC-ITX).
Required hardware:
10 x M3 nuts
4 x M3x10 socket head bolts
6 x M3x12 socket head bolts
All 10 M3 nuts are embedded in the frame by pausing the print before the following layer:
The "PWRST" letters are provided as separate bodies in case you want to print them in a different color. If the same filament is used for everything, you can use the "PW-RST Stencil" part as a guide to draw the text with a fineliner.
I use wire-wrapping wire for the "front panel" wires since I find it faster than crimping Dupont connectors. The following photo is from an older version of the frame (the new one hides the wires better):
