GoPro simplified clip mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've found that other GoPro clip mounts are fairly slavish reproductions of the originals. Which would make sense if…
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 127
- Makes
- 1
- Views
- 461
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
I've found that other GoPro clip mounts are fairly slavish reproductions of the originals. Which would make sense if we were doing injection molding, but they're always far more finicky than they should be.
This is a replacement mount simplified and tuned for 3D printing. The tolerances are such that it might only work on my own printer, but there's (bad, very bad) OpenSCAD source if it doesn't.
Print Settings
Printer Brand:
RepRap
Printer:
Makerfarm i3v 8
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30%
Notes:
Printed in PETG. ABS and other filaments with similar flexibility will probably also work. With PLA, you'll probably need to widen the spring slots (springw variable).
Category: Camera