Drawer Inserts for Ikea Kallax
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a set of various lightweight drawer inserts for Ikea Kallax drawers. 8 of these will fill the drawer entirely,…
- Rating
- 4.923 / 5
- Likes
- 285
- Downloads
- 842
- Makes
- 18
- Views
- 6,952
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
This is a set of various lightweight drawer inserts for Ikea Kallax drawers.
8 of these will fill the drawer entirely, and can be stacked for a total of 16 inserts per drawer.
They are exact width, and slightly short on length to account for the drawer pull screw that protrudes into the interior of the drawer. Print the shim and attach it to the inside front of the drawer to keep them all pushed back evenly and clear of the knob screw. Print another to put up higher if you plan to stack.
I would be happy to make a version with a custom slot layout. Just ask.
Notes:
Intended for a .40 nozzle. All walls are only 2 perimeters so this is not intended to be very durable. Raft recommended because of the base layer size.
Edit: 25 April 2025: Added four new jumbo size models.