IKEA Hugad Filament rack for 26 spools
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Its a ceiling mounted filament rack for ~26 spools of filament.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
If you have a 210x20cm space on your ceiling – like I do – then you can screw the filament rack onto it using an Ikea HUGAD curtain rod set. This way, you don't even have to cut the rods.
I used M5 threaded rods that were about 280mm long for this. If you use 350 mm long ones, you can even put in there the rolls in unopened boxes.
You probably don't need the middle element, but I played it safe. If that one wasn't there, one more roll would fit on the rack.
In addition, you will need 2 M4x15 screws per element to fix the rods.
There is also a drill template in the files.