Xbox Controller Wall Mount w/AA Battery Storage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds an Xbox Controller, with 6 spare AA batteries.
- Rating
- 4.5 / 5
- Likes
- 6
- Downloads
- 72
- Makes
- 2
- Views
- 269
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
About
The Minimalistic Xbox Controller Stand by @agepbiz is quite nice, and wall mount version by @Marunknedl_3636249 shows how versatile the original design is.
This remix adds slots for six AA batteries so gamers don't have to go hunting for batteries when running low.
How
Keep your new batteries “+” side out, and put your empty batteries “-” side out. This way you'll know when you are running low.
Slots are angled 10 deg, so the batteries don't slide out when you protest your elimination in Fortnite, or the base vibrates your wall too much. They fit just snuggly enough (15.0mm dia holes for 14mm AA alkaline batteries). I did not try rechargeable or lithium but if they are in AA-spec they should fit.
Printing
Recommended layer height for a nice print: 0.2mm or less.
Set the seam to "Nearest" in the slicer, so there's no apparent line going up the side.