1 / 4
50W/100W PSU braket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple model to attach a PSU under a desk, or any surface that can receive some screws.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I needed a bracket to attach a PSU under my desk to power some led strips, so I made these models:
Bracket for a 100W PSU, it supports units with these dimensions: 199*98*42 mm
Bracket for a 50W PSU, it supports units with these dimensions: 100*78*26 mm
The holes for the screws have a diameter of 4mm.
I like the hexagonal pattern, and this way the model is lighter and consume less filament.
The pattern doesn't require supports, only the slots for the screws need to be supported.
I suggest printing this in PETG/ABS/ASA.